RetroFed
Goddard Guryon, goddard_guryon@sopuli.xyz
Instance: sopuli.xyz
Joined: 3 years ago
Posts: 1
Comments: 12
is beehaw related to lemmy?
Posts and Comments by Goddard Guryon, goddard_guryon@sopuli.xyz
selfhostedComments by Goddard Guryon, goddard_guryon@sopuli.xyz
I’d made a separate comment asking the same question, but glad to know you’re already working on this. Great work btw!
Very likely a huge thing to ask, but have you considered adding federation to the indexing? I presume that generating and storing the index database would quickly put a severe storage bottleneck (maybe the idea here is that no single person explores the internet enough for their index database to become infeasibly large?). But, at least to me, it sounds like allowing different hister instances to share a common index (or index subsets) would greatly reduce this bottleneck. Just curious if you have any thoughts on this. Overall I love the idea and am looking forward to giving it a try soon, so well done!
Gotta say this one’s probably more helpful than any guide I could’ve found online. This does give a very clear idea of what exactly it is I’m dealing with, I’ll [try to] keep all these points in mind while I try to manifest a makeshift first attempt. Thanks a ton for all this insight!
Hah that makes a lot more sense. For now I think I’ll stick with the independent containers approach, I have zero familiarity with synology so I better take it one at a time. But usenet sounds pretty interesting now, might give it a look just for the kicks haha
Holy smokes this is extremely informative! I’ll start by pulling in chunks of your config and learning from what it gives me. As for plex/jellyfin again, the only reason I’m (slightly) biased towards jellyfin right now is precisely because it’s not as easy to set up and hence gives me more learning opportunities. But I’ll keep an eye out for plex offers regardless - sometimes it’s nice to have something that just works. But thanks a lot for such a thorough response!
I’m just using a bunch of independent docker containers behind nginx. But this now sounds a lot easier than I had in mind since a few apps I deployed were painful in the rear end when setting up correct folders. As for usenet, I’d have the same question as the other reply - in my mind it’s an archaic (lol) network protocol which I have not the slightest idea about
I tried to follow servarr head-first, but of course got lost in the jargon since I had next to zero idea of what I’m dealing with. But all these comments (and trash guides, which I somehow never encountered) seem to be great pointers to get me up to speed hehe
Haha I feel like I’m way behind anything you mentioned here. I had a bunch of old mp3 files lying around, so for now all I do is upload old/new mp3 files I procure into my nextcloud instance, then use an autosynced nextcloud folder to fill navidrome. I always knew this is a very fragile solution, but your comment seems to be a goldmine of stuff to try. Thanks!
So this is a part I’ve stumbled on for now. I do host a bunch of other stuff which I share with a few friends, so using tailscale was, for me, a bigger hassle than worth. But now that prowlarr requires a VPN connection for security, I’m on the crossroads on whether to push tailscale for everyone or figure out VPN for just prowlarr. But I suppose that’s what gluetun is for? I’ll take a look into it anyway, thanks!
Good to know I’m not stupid for feeling a little intimidated by the arr stack XD
Actually, I think I will follow this and start with just sonarr to get a feel for it first. I have barely any clue of what ‘format’ means here, so clearly I’d be better off taking a small step first. Thanks!
I do have like a bunch of old stuff from can’t-recall-when. I setup jellyfin while scrolling through the awesome-selfhosted list, but never got to really get it to work because of lack of content
Ha! That sounds like the exact thing I was looking for. I’ll go through the guide and see how well it turns out. Thanks!
I’d made a separate comment asking the same question, but glad to know you’re already working on this. Great work btw!
Very likely a huge thing to ask, but have you considered adding federation to the indexing? I presume that generating and storing the index database would quickly put a severe storage bottleneck (maybe the idea here is that no single person explores the internet enough for their index database to become infeasibly large?). But, at least to me, it sounds like allowing different hister instances to share a common index (or index subsets) would greatly reduce this bottleneck. Just curious if you have any thoughts on this. Overall I love the idea and am looking forward to giving it a try soon, so well done!
Gotta say this one’s probably more helpful than any guide I could’ve found online. This does give a very clear idea of what exactly it is I’m dealing with, I’ll [try to] keep all these points in mind while I try to manifest a makeshift first attempt. Thanks a ton for all this insight!
Hah that makes a lot more sense. For now I think I’ll stick with the independent containers approach, I have zero familiarity with synology so I better take it one at a time. But usenet sounds pretty interesting now, might give it a look just for the kicks haha
Holy smokes this is extremely informative! I’ll start by pulling in chunks of your config and learning from what it gives me. As for plex/jellyfin again, the only reason I’m (slightly) biased towards jellyfin right now is precisely because it’s not as easy to set up and hence gives me more learning opportunities. But I’ll keep an eye out for plex offers regardless - sometimes it’s nice to have something that just works. But thanks a lot for such a thorough response!
I’m just using a bunch of independent docker containers behind nginx. But this now sounds a lot easier than I had in mind since a few apps I deployed were painful in the rear end when setting up correct folders. As for usenet, I’d have the same question as the other reply - in my mind it’s an archaic (lol) network protocol which I have not the slightest idea about
I tried to follow servarr head-first, but of course got lost in the jargon since I had next to zero idea of what I’m dealing with. But all these comments (and trash guides, which I somehow never encountered) seem to be great pointers to get me up to speed hehe
Haha I feel like I’m way behind anything you mentioned here. I had a bunch of old mp3 files lying around, so for now all I do is upload old/new mp3 files I procure into my nextcloud instance, then use an autosynced nextcloud folder to fill navidrome. I always knew this is a very fragile solution, but your comment seems to be a goldmine of stuff to try. Thanks!
So this is a part I’ve stumbled on for now. I do host a bunch of other stuff which I share with a few friends, so using tailscale was, for me, a bigger hassle than worth. But now that prowlarr requires a VPN connection for security, I’m on the crossroads on whether to push tailscale for everyone or figure out VPN for just prowlarr. But I suppose that’s what gluetun is for? I’ll take a look into it anyway, thanks!
Good to know I’m not stupid for feeling a little intimidated by the arr stack XD
Actually, I think I will follow this and start with just sonarr to get a feel for it first. I have barely any clue of what ‘format’ means here, so clearly I’d be better off taking a small step first. Thanks!
I do have like a bunch of old stuff from can’t-recall-when. I setup jellyfin while scrolling through the awesome-selfhosted list, but never got to really get it to work because of lack of content
Ha! That sounds like the exact thing I was looking for. I’ll go through the guide and see how well it turns out. Thanks!
How does one get started with the *arr stack?
Hey guys! After over 2 years of me asking how to take the first steps in self-hosting, I think I’ve finally got most of the things I need set up (except for a mailcow server proxied through a VPS, but that’s for another day). I’ve been seeing a bunch of posts here about the *arr stack, and only recently it piqued my interest enough to really warrant a serious look. But I’ll be honest, it’s a bit confusing. For now, I’m just thinking of starting up the whole suite on my machine, then slowly expose to internet the parts I find useful (and shut down the parts I don’t). But I really can’t find any good…tutorial(?) on how to quickly get the whole stack running, and I’m a bit worried about launching individual apps since I don’t know if/how they communicate with each other. So I’ll try to summarize my, quite naïve, questions here: